AllFive Clear is an excellent choice for kitchens, bathrooms and other general areas and has been especially developed to withstand the damp.
Surface mounted, cable wire, wire suspension or horizontally on a wall. Installation using the seal supplied with the luminaire provides protection classification IP 44. With wall mounting or installation without seals the luminaire is classified IP 40. Single lamp luminaires are not balanced therefore cable wire installations should be avoided.
Four Ø 19 mm access holes with blanking grommets on top of the luminaire and one Ø 16 mm knock-out in each end. The centrally positioned snap-in terminal block 5x2.5 mm² provides through-wiring. The luminaire is also available with 5x1.5 mm² through-wiring and snap-in terminal blocks at each end (-143).
Body in white enamelled, corrosion resistant aluzinc (RAL 9016). End-caps of ASA plastic.
Clear cover of extruded acrylic plastic with prismatic underside and lined sides.
AllFive with emLED available in 1x25/28 W and 1x32/35 W. For further information on emLED please refer to the Emergency Lighting chapter. When the seal supplied with the luminaire is used, the protection classification is IP 23. Without seals the luminaire is classified IP 20.
e-Sense Detect – microwave sensor for on/off function, or absence dimming with the option of switch-off function.
e-Sense Move – wireless control between luminaires. Microwave sensor for absence dimming with the option of switch-off function.
A reflector of specular anodised aluminium is available as an accessory for the 2-lamp version. Can be installed for a symmetrical or asymmetrical light distribution.
Reflectors are available as accessories for the two lamp luminaires.