ATLAS PLASTICISED ADHESIVE - general purpose adhesive (C1TE type)
Product details
- Producer:
- ATLAS
- Product code:
- MD-ATZKUAC1TE
- Category:
- Tile Adhesives
- Collection:
- ADHESIVES FOR TILES
Share
Product description
Description
Ideal for bathrooms, kitchens, corridors, stairs and small decorative elements on the outside of the buildings – permanently fixes tiles wherever the application of deformable adhesive is not required.
Levels mineral substrates – can be used to fill in the surface of walls and jointless floors.
Enables bricklaying with thin joint – the adhesive can be used for small bricklaying works during finishing interiors.
Extension of range of applications possible – after combining with ATLAS ELASTIC EMULSION, the adhesive can be used on substrates exposed to heat and mechanical deformation, e.g. plasterboards, floor heating or wall heating.
The main characteristics
• easy and nice to work with
• for bathrooms, kitchens, corridors
• for small façade decorative elements
• extended open time and reduced slip
• enables leveling mineral substrates
The main parameters
• consumption: ca. 1.5 kg of dry mix / 1 m² / 1 mm adhesive layer
• adhesion: min. 0.5 N/mm²
• bed thickness: 2 - 10 mm
Series description
Classification of adhesives for tiles
Adhesives for tiles are classified and marked according to PN-EN 12004 Standard
The Standard specifies three types of adhesives:
C – cement based adhesives
D – dispersion adhesives
R – adhesives based on reactive resins
Each of the above types of adhesives can appear in different forms (classes) corresponding to additional requirements:
1 – standard setting adhesives – adhesion after 28 days ≥ 0.5 N/mm2
2 – adhesives of improved parameters – increased adhesion, after 28 days ≥ 1.0 N/mm2
F – fast setting adhesives – adhesion ≥ 0.5 N/mm2, measured after time not exceeding 6 hours
T – adhesives with reduced slip – slip not exceeding 0.5 mm
E – adhesives with extended open time – adhesion after 28 days ≥ 0.5 N/mm2, despite the fact the time between the application of the adhesive and placing a tile is not shorter than 30 minutes.
Adhesive selection
Before fixing ceramic tiling or natural stone, please pay attention to a few elements significant for the proper selection of the adhesive.
These are:
- substrate – the material it is made of, its absorptive power, roughness, adhesiveness, cleanliness, maturing degree and possible deflection
- tiles – their kind (gres-porcelain, terracotta, glazed tiles, stone), size (mosaic, large size), absorptive power and resistance to discolouration
- conditions of use of the tiling – the atmospheric influence (indoor, outdoor), situation (wall or floor), kind and volume of usable load (pedestrian or vehicle traffic), frequency and the volume of temperature changes.
Additional Resources
Catalogue
catalogue.pdf
1.96 MBkatalog.pdf
7.5 MB
