Boards coloured a shade of ash and coated with matt lacquer. Clearly trimmed edges (bevelling) with the natural texture of the wood brought out by brushing.
TASTES OF LIFE is the Barlinek board in its most designer incarnation. The most fashionable shades in a bold combination with the natural beauty of real wood.
- 100% wood
- Possible to lay over underloor heating
- Solid construction
- A floor resistant to changes in temperature and humidity
- Fast and easy DIY installation
- A product ready for use immediately after installation
- Possible to renovate
100% of wood
The Barlinek floorboard is a natural and noble product created from genuine wood. Wooden floorboards are healthier and more durable than any kind of synthetic imitation. Unlike laminates, they are pleasantly warm to the touch, they do not electrify nor attract dust or mites. Therefore, they are a perfect solution for allergy sufferers. They provide perfect soundproofing, and thanks to their ability to absorb humidity they regulate microclimate of the room. Also, the Barlinek wooden floorboard can be sanded down and renovated with lacquer many times.
For under floor heating
Not every wood floor can be laid over underfloor heating. However, thanks to its layered cross structure, the Barlinek floorboard conducts heat well and can be successfully applied on both electric and water floor heating. It is one of its advantages over solid wood floors. The Barlinek floorboard can be installed over floor heating in two ways. It can be laid in a floating system or by gluing to the subfloor.
Our climate is a real challenge for the floor. Natural wood’s moisture content will fluctuate depending on the weather outside. For this reason, it sometimes occurs that traditional wood floors swell, squeak or dry out causing splits. But not the Barlinek floorboard! It is made not from one, but three layers of real wood arranged in a cross structure. The cross construction reduces natural tension and compression of wood, provides a balance between the layers of the board, and thus guarantees the stability of the floor, even under changing weather conditions outside. The Barlinek floorboard is not one, but three layers of real wood arranged in a modern cross construction. The Barlinek floorboard's layered structure ensures the floor's stability and enables the forces of nature to be tamed as effectively as possible. It is perfectly suited for underfloor heating.
SURFACE LAYER - selected European or exotic wood, oiled or lacquered.
MIDDLE AND BOTTOM LAYER - cross structure made of coniferous wood.
The Barlinek floorboard can be installed in a floating system, that is glueless and based on modern tongue-and-groove joints. It is a quick and simple method, that allows you to install the floor yourself, without having to employ an expert. The floor is also easy to be dismantled or re-installed. An alternative is to install the floor in a traditional way - by gluing the boards to the subfloor, which ensures stability of the installation even on large surfaces. The Barlinek floorboard does not require any additional preservative treatment due to its highest quality factory-finishing with oils or lacquers. The floor is ready for use immediately after installation.