JavaScript is turned off

Please enable JavaScript in your browser
to take full advantage of our website.

SEWAGE PIPES

Producer:: Gamrat
Product code:: MD-GASR-RK
Category:: Pipes and connectors
Collection:: PIPES

Gamrat

: http://www.gamrat.pl/

UNPLASTICIZED PVC SEWAGE PIPES

Advantages of PVC-U sewerage pipe

high resistance to many chemicals;
total resistance of external surfaces to corrosive and destructive effects of groundwater (protective coats are not required);
smooth internal surface, which involves resistance to depositing of internal sediments, clogging and also reducing the flow resistance of the liquid;
easily laying and installing due to their length, low weight and type of joints;
long service life of pipes;
tightness of joints with respect to the exfi ltration of wastewater into the ground, what ensures the protection of environment, as well as with respect to the infi ltration of groundwater into the inside of a sewer, which is connected with the economics of the construction and operation of sewage treatment plants;
low weight of pipes, more than ten times smaller than that of substitutes (concrete, stoneware, cast iron);
high resistance to abrasion.

Application

Construction of sanitary, combined and rainwater sewer networks, for non-pressurized transporting of sewage.

How to connectstandard push-fi t socket joint (P,W).

Depending on the construction of a socket, there are distinguished two types of PVc-U sewer pipes:

P – pipe with a rectangular socket groove for the range of outside diameters from 110 to 500 mm.
W – pipe with an oval socket groove with the outside diameter of 630 mm.

PVC-U sewer pipes for the construction of external sewer networks are manufactured as the following pipe versions:

homogeneous-wall pipes according to DIN EN 1401-1.
structured-wall pipes according to DIN EN 13476-2.

Sealing ring joints

After cleaning the pipe or fi tting socket, place the seal into a dry socket groove. To facilitate this, make the seal to have the shape of the fi gure eight. Then, clean the outer surface of the spigot pipe end. To increase the slip, apply talcum or “SILPASTA R” to this pipe end and join pipes by pressing the spigot pipe into the socket to a proper depth. Detailed information on joining and laying the pipes is given below.

Solvent cement joints

For adhesive bonding of PVC-U pipes, you shall use only an aggressive adhesive. Degrease the pipe surfaces to be bonded with methyl chloride. Before applying an adhesive, make sure that the surface is dry and clean. Apply the adhesive with a brush, starting from the innermost end of the socket. The adhesive should be

applied evenly. The whole operation shall not last longer than one minute. Once the adhesive is applied, press home the connected elements. Immediately after joining, remove the excess adhesive squeezed out. During 5 minutes after joining, you shall not move the joined elements.

Collection description

THE HIGHEST QUALITY RAW MATERIALS AND WORLD CLASS TECHNOLOGY ARE USED TO PRODUCE OUR PIPES. TO MEET INTERNATIONAL STANDARDS LARGE-SCALE TESTS ARE CARRIED OUT.

All resources below have been provided by the manufacturer. If you are interested in details or additional information, which you have not found in the service, please contact the manufacturer.